FLYWHEEL PULLER DRIVER TRIUMPH, A-7835, BSA

FLYWHEEL PULLER DRIVE TOOL THREAD 1x20tpi

Triumph 750, 650 & 500 from 66′ up BSA 500 & 600, 750 Triples from 66′ up

• Used for removal of the flywheel or rotor if applicable.
• Premium quality high carbon steel S45C.
• Heat treated for strength and durability.
• Durable hot black oxide finish.

Tips on use.
– Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in.
– Use copper grease on the puller threads, for long life.
– Make sure the puller is fully screwed into the flywheel.
– After tightening use a hammer on the centre and tap to jolt free [not always need].
– If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel.

Part No. 00-8482.FIR FIR-BRAND [FACTORY IMAGE RACING] (Distributed )

Cross Reference Numbers Only:
UP-12239